- EMAIL: SALES@CRESSALL.COM
- • TEL: +44 (0) 116 273 3633
STANDARD BRAKING RESISTORS ON DEMAND
Cressall’s standard ranges of high capacity dynamic braking resistors (DBRs) for regenerative braking are low cost, easy to specify, quick to install and with ratings to suit inverter drives of any power.
Our wide range of resistor technologies means that we can select the most technically appropriate and cost-effective resistor design for any application, whether continuous, intermittent or infrequent.
We offer two product ranges to cover continuous powers up to 100kW:
ES and DBR ranges for powers to 25kW
Expanded mesh and HPR Grid ranges for powers to 100kW
BENEFITS OF USING CRESSALL DBRs
- Low cost: Achieved through better design, standardisation and use of common components
- Easy to specify: Standard enclosure designs for powers to 100kW
- Standard power ratings: Continuous ratings from 600W to 100kW continuous
- Extensive testing data means we can accurately predict thermal performance and optimise resistor selection for the specified duty.
Fast delivery: For same day dispatch of stock items (ES and DBR) in the UK contact our distributor: CP Automation before 10.00am. Units not held in stock can be manufactured quickly.
Performance: Our range of elements combine excellent heat dissipation for continuous braking with the highest active surface area per kW in the industry, giving outstanding short-time performance for repetitive braking duties.
Confidence: Our experience in supplying resistors for electric motor brakes combined with accurate sizing software means we can predict the performance of your resistor for any specified duty cycle.
ES & BRAKING RESISTOR DESIGNS UP TO 25kW
Cressall ES and DBR braking resistors are based on two types of resistor elements:
HP Coils: spiral wire-wound coils on ceramic formers
ZC Coils: edge-wound coiled strip on ceramic formers
Both elements offer high overload capacity and rapid cooling.
The alloys used have low changes in resistance over the temperature range: no more than 18%, unlike designs using 304 stainless steel which can increase in resistance during the heating cycle by as much as 50%, resulting in lower braking currents and less effective braking.
ES 0.6 - 8kW & DBR SERIES 9 - 25kW CONTINUOUS
ES Series, 0.6 – 8kW Continuous
- Our ES range is usually available from stock so there’s no waiting for the right DBR
- Spiral wire wound resistor element on ceramic former
- Negligible noise
- Low inductance
- Temperature stable design, low increase of resistance value
- Optional thermal switch
- Terminal block mounted at one end of the enclosure, cover for terminal block, allow for ingress protection IP 20
- Easy installation: Pre-drilled mounting holes, knock-outs in terminal cover, units suitable for horizontal or side mounting.
DBR Series, 9 – 25 kW Continuous:
- Wire or wound edge-wound strip resistor element
- Temperature stable design, low increase of resistance value
- Standard thermal switch
- Option for IP21 drip proof canopies
Integral terminal compartment - Easy installation: Pre-drilled mounting holes, knock-outs in terminal compartment, units suitable for horizontal or side mounting.
- Option for 304 stainless steel enclosures
- Dispatched from stock for common sizes, manufactured in a few days for other ratings.
| Power kW |
DBR | Resistance Min. Value |
Resistance Tolerance |
Dimensions mm |
Mounting centres |
Weight Kg |
|||
|---|---|---|---|---|---|---|---|---|---|
| L | W | H | w | l | |||||
| 0.6kW | ESH | 2.50Ω | -0/+5% | 288 | 121 | 141 | 236 | 92 | 1.4 |
| 1kW | EST | 4.00Ω | -0/+5% | 367 | 121 | 141 | 315 | 92 | 1.8 |
| 1.5kW | ES1 | 6.00Ω | -0/+5% | 467 | 121 | 141 | 415 | 92 | 2.2 |
| 2kW | EST2 | 2.00Ω | -0/+5% | 367 | 213 | 141 | 315 | 185 | 3 |
| 3kW | ES2 | 3.00Ω | -0/+5% | 467 | 213 | 141 | 415 | 185 | 3.8 |
| 4.5kW | ES3 | 2.00Ω | -0/+5% | 467 | 307 | 141 | 415 | 278 | 5.4 |
| 6kW | ES4 | 1.50Ω | -0/+5% | 500 | 388 | 195 | 410 | 360 | 6.6 |
| 8kW | ES8 | 0.75Ω | -0/+5% | 500 | 388 | 390 | 410 | 360 | 11.5 |
| 9kW | DBR18 | .19Ω | -0/+10% | 798 | 360 | 302 | 692 | 280 | 25 |
| 12kW | DBR24 | .25Ω | -0/+10% | 798 | 360 | 302 | 692 | 280 | 33 |
| 18kW | DBR36 | .34Ω | -0/+10% | 798 | 360 | 402 | 692 | 280 | 45 |
| 25kW | DBR54 | .22Ω | -0/+10% | 798 | 542 | 402 | 692 | 462 | 60 |
EXPANDED MESH & HPR GRID BRAKING RESISTORS TO 100kW
For higher power applications Cressall offer expanded mesh and HPR grid resistor designs, well proven in regenerative braking applications around the world.
With these elements we can offer flexible and cost effective solutions for higher powers and heavy overloads.
Units are designed to meet the customer’s specified duty but are based on standard formats, meaning that design, manufacture and despatch can be in just a few weeks.
- Low inductance expanded mesh or HPR grid element
- Choice of resistance alloys giving a wide cost vs. performance option
- Choice of enclosure materials: pre-galvanised mild steel, 304 or 316 stainless steel allowing designs to be optimized for both price and performance.
- Optional thermal switch Option for IP23 drip proof canopies
- Manufactured to order but dispatched in a few weeks to standard designs